Where things stand..

Well its been some time since my last entry. I have got all my parts back from the powder coat and chrome shops. First I have to hand it to everyone over at North County Powder Coating for doing such an amazing job with both the gloss black and candy apple red finishes. Not only did they strip, and powder coat the parts, but  their attention to detail is amazing I couldn't be happier with their service and product. Now for the chrome shop... Azteca Polishing in Escondido is a small family run shop that puts out some of the best chrome work I have ever seen. When I first walked into the small shop what hit me first was all the cars and trucks he had on the wall and 90% of them were clippings from custom car mags that verified the name of his shop! He took my old rusty 1930's Elgin crank sprocket and made it look brand new and his whole family are some of the nicest people I have ever met. SO now that I have everything back from these fine shops its time to put this beast together..

the adventure of researching parts..

I have been doing tons of research on old balloon tire bicycles for the past 3 or so years now, and when I started planning this Wild Card build I was (and still am) getting into the early board track racer motorcycles of the early 1910's to mid 1930's. I found out that these builders of the board trackers would take apart a brand new stock motorcycle and put back together after they would take off everything they could to lighten up the motorcycle. These motorcycles didnt have brakes, lights, transmissons, suspension of any kind, and were built for wide open throttle racing on oval tracks made from wood. So I took that philosophy and applied it to the Wild Card. The Wild Card frame is a Rollfast 26" boys frame and back when these balloon tires bicycles were made they would came with everything they could put on a bicycle in those days such as, fenders, lights, horn tanks, rear racks, and tons and tons of chrome on the top models, also 3 speed internal rear hubs (coaster brake). Now this is where I start to do my research in what parts I wanted to use as I want to build this bike as simply as possible... so no horn tank, or fenders, or lights, or rear racks, or tons and tons of chrome. I knew from the get go I wanted the drive train to be skip tooth, and a fixed gear (where the rear sprocket is directly connected to the rear hub... meaning the pedals are always in motion unless you stop moving you legs kind of like the BT motorcycle with no brakes or gears) which of course the parts are no longer being made. It was time to search these parts out.... {to be continued}

The Wild Card build

As some of you know I have been in the process of this build for some time. I have been doing tons of research on these old  balloon tire bikes, and making a list of parts for the build. I am starting the Build with a 1953 Rollfast 26" frame and a front crank/ sprocket from a 1932 Elgin. Above is the picture of where everything started from.. A lot more to come so stay tuned! 

Here is a run down of parts being used for the build..
1953 Rollfast 26" frame
Monark springer front end (repros)
1932 Elgin front sprocket and crank arms (sprocket is a 26 skip tooth)
1938 Schwinn Paramount hubs
Brooks leather saddle (B72)
N.O.S. Diamond Skip Tooth Chain
J.C. Higgins grips (white)
1950's Schwinn seat post and clamp
1930's 8 tooth TDC Track cog
1920's Champs Elysées bars (repros)

Here is a run down of parts being used for the build.. 1953 Rollfast 26" frame Monark springer front end (repros) 1932 Elgin front sprocket and crank arms (sprocket is a 26 skip tooth) 1934 Schwinn Alloy road hubs Brooks leather saddle (B72) NOS Diamond Skip Tooth Chain J.C. Higgins grips (white) 1950's Schwinn seat post and clamp 1930's 8 tooth Track rear sprocket 1920's Champs Elysées bars (repros)